Yes. The L400 and T400 are capable of controlling inverters. The inverter will be wired to the ATS, hence the ATS recognizes it as the 3rd source of supply making it priority 2. In other words when utility power supply
First, the fault on the ATS is displayed with troubleshooting method for the touch screen models. For the LCD model the fault is displayed with a fault code which refers the user to the operational manual to interpret and troubleshoot
Most of the engine/generator controllers used today are digital and are designed to provide control of the generator set. The controller system monitors the operation of the engine and generator functions. Typical safety items include low oil pressure, high temperature,
This can vary by the type of ATS and depends on the number of circuits you would like covered. In a partial home application, the ATS is installed similarly to a subpanel or manual changeover, and the circuits that are
There are varieties of ATS depending on the load requirement. For domestic application single phase ATS is available, for commercial and industrial application 3phase system is available and for telecom application 3phase system with dual generator is also available
Yes. Most of the ATS models are equipped with special load functions were this kind of loads can be connected and, the power requirement to operate the special load can be configure on the ATS either utility or generator or